Palm Springs FL

Cvhfdgjbdg

Meter can load lug burnt and melted need new meter can

estimate for pool pump

troubleshooting with Ryan

Repaired tripping breaker for outdoor hallway lights. was a bad wire in ground that fed an old pole light that was removed and put In a j box. started troubleshooting pool lights. I fixed one pool but the other needs more trouble shooting.

Building one I’ll hallway lighting. Customer would like existing hallway lighting, which is every other light is on in hallway would like it switched so every other light is on in hallway lights are on photocell. Finding the location of timer, I determined that each section of lighting is on two different timers that are in two different areas. In addition, the lights the customers would like on also controls rooftop lighting, which is on a photocell. Power is switched to the lights that the customer wants on that controls the rooftop lights and there go on as well, if customer wants this fix, we will need to come back and do further troubleshooting to get the lighting. Exactly right After thoroughly going through lighting, circuits and troubleshooting, I was able to separate roof lighting and put it on a photocell and relay, which will allow roof lighting to turn on At night and not stay on permanently and constant

After reviewing, and speaking with building manager, all electrical issues with building three are fixed for the time being There seems to be some wiring issues with an electrical pump that has to do with the pond in the middle of the buildings but as of right now there is no pump on site, so I will speak with J.R. on if we need to come back to repair them

Lights that are not working or not on roof but are on the second floor walkway, lighting lighting is set up in a way where certain lights are supposed to be on during the day and all lights are supposed to be on at night. Some lights are on photocell. Some lights are not. There is a lighting contactor in panel room. Also, a junction box, where lighting circuits are located, most of lights on second floor in building three are not working and need to be troubleshoot electrician to solve issue. with additional help and tracking town circuit and opening up lighting fixtures, I was able to get all lights and fixtures operating properly with the addition of two fixtures that needed to be replaced, which was done. All lighting and building three is functioning properly

Received call Friday night about flood in clubhouse. Sent emergency response team out to restore property. Evacuated remaining standing water, set up drying equipment, removed baseboard to allow air to dry out the cavities. Due to damage removed affected cabinets and performed 2 foot flood cuts. Due to microbial substance Suncoast will provide mold test to determine next steps.

Water Restoration Emergency Call

Customers microwave is tripping breaker every time they attempt to use it after thoroughly troubleshooting the issue I have determined that the microwave has failed and needs to be replaced Technician Notes: * current microwave is bad & causing tripping of breaker ; customer approved New Microwave & Installation by Suncoast

Commercial Electrical Fix to bring up to Code & New Install: Remove recalled ITE disconnect and install new disconnect. Eliminate double tap from disconnect rewire to panel. Fix dangerous splice in gutter.

Customer called - 4th floor, there is no power to the laundry room and the machines have water in them. This invoice for the Troubleshooting is Waived due to Approved Estimate for needed work to fix issue ** Remove recalled ITE disconnect and install new disconnect. Eliminate double tap from disconnect rewire to panel. Fix dangerous splice in gutter.

Provided estimate

Replaced old (fire hazard) electrical panel with new 125 amp main lug panel

Replace ITE old style panel with new indoor main lug panel with all new breakers no code.

Performed onsite inspection and found burnt aluminum neutral wire causing electrical issues. Remove existing burnt feeder wires and pull new cooper feeder wires through pipe to indoor panel location.

Pulling electrical feeders into condo electric room

Pulling Electrical feeders in a condo electric room

Home owners Tenants Range needs troubleshooting Tech Notes: After Troubleshooting found Federal Pacific Recalled Panel which is causing electrical issues in home. Created Estimate & emailed to Home Owner for: Replaced old (fire hazard) electrical panel with new 125 amp main lug panel

Replaced out old fpe panel in kitchen

Electrical inspection Of HOA Meter Room for Evaluation & Quoting upgraded Electrical system

UV Light Air Purification System Replacement: In response to the need for an upgrade, we replaced an aging UV-light air purification system with a state-of-the-art unit. Our installation process involved the careful removal of the old system and the precise installation of the new one to ensure uninterrupted and highly effective air purification. This new system not only boasts the latest technological advancements in UV-light purification but also provides enhanced capacity and efficiency in safeguarding indoor air quality.

Duct Cleaning. A client experienced decreased air quality due to dust and debris buildup in the HVAC ducts. Our team performed a thorough duct cleaning and sanitization process, eliminating accumulated contaminants and improving the air quality throughout the residence. The client contacted us afterward after they noticed a significant improvement in indoor air quality!

Mold Removal and Renovation - In response to a sudden mold outbreak in a residence, we conducted a quick yet thorough mold removal process. Our team efficiently cleaned and sanitized the affected spaces, removed any compromised materials, and executed a comprehensive renovation to eradicate all traces of mold and create a mold-resistant environment for the homeowners.